wiki:MuninConfigurationMasterExampleCombined
Attention: The content of this page has been moved to the Munin Guide Loaning data combined with sum and cdef. This wiki page has therefore been set to "Read only" and later will be purged.

Different arithmetics may be combined to create the graphs you want. Insert appropriate lines to the Munin-Masters configuration file munin.conf.

Loaning data combined with sum and cdef

The first example shows how to create a graph by loaning data from other sources, then adding an average value from five other data sources using sum and cdef. The data in the example uses the following types of temperature measurements:

  1. Disk temperatures from S.M.A.R.T. readouts from servers called donald and ferdinand (lines 06, 07)
  2. Motherboard temperatures from sensors readouts from the same servers (lines 08, 09)
  3. weather.com reading from Oslo airport, Gardermoen (line 10)
  4. A regular temperature sensor (line 11)

Line 06 is only a placeholder, which will be populated later by using sum and cdef.

01     temperatures.update no
02     temperatures.graph_args --base 1000 -l 0
03     temperatures.graph_category Sensors
04     temperatures.graph_title Different temperatures
05     temperatures.graph_order \
06             donald_disk \
07             ferdinand_disk=ferdinand.example.com:hddtemp_smartctl.sda \
08             donald_mb=donald.example.com:sensors_temp.temp1 \
09             ferdinand_mb=ferdinand.example.com:sensors_temp.temp1 \
10             gardermoen=ferdinand.example.com:temperatures.ENGM \
11             VG=donald.example.com:munintemp.vg
12     temperatures.donald_disk.sum \
13             donald.example.com:hddtemp_smartctl.sda \
14             donald.example.com:hddtemp_smartctl.sdb \
15             donald.example.com:hddtemp_smartctl.sdc \
16             donald.example.com:hddtemp_smartctl.sdd \
17             donald.example.com:hddtemp_smartctl.sde
18     temperatures.donald_disk.cdef donald_disk,5,/
19     temperatures.VG.label VG
20     temperatures.donald_mb.label Mainboard donald
21     temperatures.ferdinand_mb.label Mainboard ferdinand
22     temperatures.gardermoen.label Oslo/Gardermoen
23     temperatures.ferdinand_disk.label Avg disk temp ferdinand
24     temperatures.donald_disk.label Avg disk temp donald

01 - 04: The usual headers
05 - 11: Defines the graph order, where 5 out of 6 data sources are borrowed elsewhere
         Note: Line 11 defines a not yet "populated" data source.
12 - 17: Sums 5 other data sources (temperatures from 5 disks), into the "donald_disk" data source
     18: Divides the "donald_disk" data source by the number of sources (5) to create an average
19 - 24: Labels to make it all look neat

This produces a pretty graph like this, to show the relation between outside temperatures and disk/mainboard temperatures:

Last modified at 2016-10-18T18:28:15+02:00 Last modified on 2016-10-18T18:28:15+02:00

Attachments (1)

Download all attachments as: .zip